Choosing the right pillowcase size helps your pillow sit naturally without feeling overly compressed or leaving too much loose fabric.

In Australia, Standard, Queen, King and European are the most common pillow and pillowcase categories. However, exact dimensions can vary between manufacturers, so it is always worth measuring your pillow before ordering.

Use this Australian pillowcase size guide to compare common dimensions and find the most suitable fit for your bed.

Explore Lovalin’s organic bamboo pillowcase sets and mulberry silk pillowcases.

Australian Pillow Size Chart

The following measurements are commonly used as a general reference in Australia.

Pillow type Common Australian dimensions Shape
Standard Approximately 48–50 × 73–75 cm Rectangular
Queen Approximately 50–54 × 76–80 cm Rectangular
King Approximately 50–54 × 90–96 cm Long rectangular
European Approximately 65 × 65 cm Square
Body pillow Approximately 45–48 × 150–152 cm Extra-long rectangular

Measurements are shown as width × length.

Australian pillow dimensions are not completely standardised. For example, some brands list a Standard pillow as 48 × 73 cm, while others use measurements closer to 50 × 75 cm. Queen and King pillow dimensions can also vary slightly.

Pillow Size and Pillowcase Size Are Not Always Identical

A pillowcase does not always have exactly the same dimensions as the pillow it is designed to hold.

The case may include a small amount of additional fabric to allow for:

  • the thickness and loft of the pillow

  • seams and stitching

  • an internal flap or envelope closure

  • natural movement of the filling

  • easier insertion and removal

For this reason, a pillowcase measuring 48 × 74 cm may still be intended for a Standard pillow within a similar size range.

The product category and actual measurements should be considered together rather than comparing numbers alone.

Lovalin Standard Pillowcase Size

Lovalin’s current bamboo pillowcases are designed for a standard Australian rectangular pillow.

Lovalin product Pillowcase dimensions
Organic bamboo pillowcase 48 × 74 cm
Mulberry silk pillowcase 48 × 74 cm

Dimensions may sometimes be displayed as 74 × 48 cm on product pages. This describes the same rectangular size with the length listed first.

Lovalin’s bamboo pillowcases are available as coordinating sets and are also included with selected bamboo sheet sets. The current collection is made from organic bamboo sateen and designed to coordinate with Lovalin bedding colours.

Shop Lovalin bamboo pillowcase sets.

Standard Pillowcases

A Standard pillow is the most widely used rectangular pillow size in Australia.

Standard pillows commonly measure approximately:

48–50 × 73–75 cm

They are suitable for:

  • Single beds

  • King Single beds

  • Double beds

  • Queen beds

  • King beds

  • guest bedrooms

  • children’s and adults’ bedrooms

A Standard pillowcase is therefore generally the most versatile choice.

Lovalin’s 48 × 74 cm pillowcases fall within the common Australian Standard size range.

Queen Pillowcases

A Queen pillow is usually slightly longer than a Standard pillow.

Common Queen pillow dimensions are approximately:

50–54 × 76–80 cm

A Queen pillowcase may suit sleepers who prefer:

  • a little more surface area

  • a longer pillow without moving to a King size

  • a fuller appearance on a Queen or King bed

  • additional room around the shoulders and head

Because Queen pillows are only moderately longer than Standard pillows, the two sizes can sometimes look similar. However, a Standard pillowcase may feel too tight on a full Queen pillow.

Lovalin does not currently list a separate Queen-size bamboo or silk pillowcase in its main pillowcase collections. Check the current product page for the latest size availability.

King Pillowcases

King pillows are much longer than Standard or Queen pillows.

Common Australian King pillow dimensions are approximately:

50–54 × 90–96 cm

They are most commonly used on:

  • King beds

  • Super King beds

  • wide Queen beds where a fuller appearance is preferred

Two King pillows can create a broad, streamlined look across a King bed. However, they require King pillowcases and should not be placed inside Standard cases.

Lovalin does not currently list a separate King pillowcase in its main bamboo or silk pillowcase ranges.

European Pillowcases

European pillows are square rather than rectangular.

The most common Australian European pillow size is:

65 × 65 cm

European pillows are generally used as decorative or supportive layers rather than as the main sleeping pillow.

They are often placed:

  • behind Standard or King sleeping pillows

  • against the headboard

  • in front of large cushions

  • as a decorative layer on Queen and King beds

A European pillow requires a matching square European pillowcase. A Standard rectangular pillowcase will not fit correctly.

How to Measure a Pillow

Remove the existing pillowcase and place the pillow flat on the bed without pressing down on it.

Measure:

Width

Measure across the shorter side of the pillow from seam to seam.

Length

Measure across the longer side from one end seam to the other.

Height or loft

Measure approximately from the lower surface to the highest part of the pillow.

Pillow loft is particularly important when the pillow is very full, firm or heavily filled. Two pillows can have the same width and length but fit differently inside the same pillowcase because one is much thicker.

How Should a Pillowcase Fit?

A well-fitting pillowcase should:

  • hold the pillow securely

  • allow the pillow to retain its natural shape

  • close without excessive pulling

  • sit smoothly without large amounts of loose fabric

  • avoid placing unnecessary tension on the seams

A case that is too small may compress the pillow, pull at the closure or make the pillow feel firmer.

A case that is too large may look loose and allow the pillow to move around inside.

A small amount of room is normal, particularly when the pillowcase uses an internal envelope flap.

Can a Standard Pillowcase Fit a Queen Pillow?

It depends on the actual measurements and thickness of the pillow.

A flatter Queen pillow may fit inside a generously sized Standard pillowcase, but a full Queen pillow will often feel too long or tight.

For the most reliable fit, use a Queen pillowcase for a Queen pillow and compare the actual measurements before purchasing.

Can a Queen Pillowcase Fit a Standard Pillow?

A Standard pillow can usually be placed inside a larger Queen pillowcase, but there may be excess fabric at the end.

This may not affect comfort, but it can produce a looser appearance and allow the pillow to shift inside the case.

A matching Standard pillowcase will normally give a neater fit.

How Many Pillows Fit Across Each Bed?

The number of pillows you use is a matter of personal preference, but the following arrangements are common.

Bed size Simple arrangement Fuller arrangement
Single 1 Standard pillow 1 Standard plus a decorative cushion
King Single 1 Standard pillow 1–2 Standard pillows
Double 2 Standard pillows 2 Standard plus decorative cushions
Queen 2 Standard or Queen pillows 2 sleeping pillows plus 2 European pillows
King 2 King or 3 Standard pillows 2–3 sleeping pillows plus European pillows
Super King 2 King or 3 Standard pillows Layered King, Standard and European pillows

These are styling suggestions rather than strict rules. Pillow thickness, headboard width and the look you prefer will affect the best arrangement.

Standard or European Pillowcase?

Choose a Standard pillowcase when… Choose a European pillowcase when…
The pillow is rectangular The pillow is square
It is your main sleeping pillow It is mainly decorative or supportive
You want a versatile everyday size You want to add height and layering
The pillow measures around 48–50 × 73–75 cm The pillow measures approximately 65 × 65 cm

The two sizes are not interchangeable because they use different shapes.

Choosing Pillowcases for a Sheet Set

Most Australian sheet sets include Standard rectangular pillowcases rather than pillowcases matching the mattress name.

For example, a Queen sheet set will often still contain Standard pillowcases. The word “Queen” in the set title generally refers to the fitted sheet and flat sheet dimensions, not necessarily the pillowcases.

Lovalin’s current bamboo sheet sets include Standard pillowcases measuring 48 × 74 cm. Always review the set inclusions before ordering additional pillowcases.

Explore:

Frequently Asked Questions

What is the standard pillowcase size in Australia?

Australian Standard pillows and pillowcases are commonly around 48–50 cm wide and 73–75 cm long, although dimensions vary slightly between brands.

What size are Lovalin pillowcases?

Lovalin’s current bamboo and mulberry silk pillowcases measure 48 × 74 cm and are designed for a Standard Australian rectangular pillow.

Are Queen pillowcases the same as Standard pillowcases?

No. Queen pillowcases are generally several centimetres longer than Standard pillowcases, although exact measurements vary between brands.

Are King pillowcases wider than Standard pillowcases?

They are usually similar in height but considerably longer. Australian King pillows commonly measure approximately 50–54 × 90–96 cm.

What size is a European pillowcase?

A common Australian European pillowcase is approximately 65 × 65 cm and is designed for a square European pillow.

Does a Queen sheet set include Queen pillowcases?

Not necessarily. Many Queen sheet sets include Standard pillowcases. Check the listed inclusions and pillowcase dimensions before ordering.

Should the pillowcase be larger than the pillow?

A pillowcase may include a small amount of extra fabric for seams, loft and its closure. It should not be so tight that it compresses the pillow or so loose that the pillow moves excessively.

Find the Right Pillowcase

Measure your pillow from seam to seam and compare it with the product dimensions before choosing a pillowcase.

Explore Lovalin’s:

Always refer to the individual product page for current colours, availability and final dimensions.